THÜROS meat holder for grilling surface 35 cm x 35 cm
THÜROS Barbecue Hood Holder - suitable for T2 barbecues
THÜROS Barbecue Hood Holder for T3 Grills
The THÜROS Warming rack extends the cooking area to a second level. It is easily attached to the mountable wind deflector (A3030E) with one simple hand movement.
On the second level, cooked grillables can be kept warm or sauces and buns can be heated up.
This enables you to grill goods with different cooking times direct and serve them at the same time. Like this the two levels are used perferctly.
Besides, the mountable wind deflector is the basic attachment for other accessories as well. Due to the cut outs on the sides, it can be extended for rotisserie.
Product data:
- made of electropolished, food-safe, antimagnetic stainless steel V2A
- dimensions (height x width x depth): 2 x 34 x 15 cm
Needed accessories: THÜROS mountable wind deflector for T1 (A3030E)
Recommended accessories: /
Not compatible with: /
Scope of supply:
Warming rack for T1
THÜROS meat holder for grilling surface 42 cm x 42 cm
THÜROS Holder for T4 Barbecue Hoods
THÜROS Warming rack for THÜROS T2 models
The THÜROS Warming rack extends the cooking area to a second level. It is easily attached to the mountable wind deflector (A3535E) with one simple hand movement. On the second level, cooked grillables can be kept warm or sauces and buns can be heated up.
This enables you to grill goods with different cooking times direct and serve them at the same time. Like this the two levels are used perferctly.
Besides, the mountable wind deflector is the basic attachment for other accessories as well.
Due to the cut outs on the sides, it can be extended for rotisserie. In addtion, the chracoal burner for side heat (KSCH3535) can be attached to the wind deflector instead of the warming rack to have the complete set for indirect rotisserie.
Product data:
- made of electropolished, food-safe, antimagnetic stainless steel V2A
- dimensions (height x width x depth): 8 x 37 x 17 cm
Needed accessories: THÜROS mountable wind deflector for T2 (A3535E)
Recommended accessories: /
Not compatible with: /
Scope of supply:
Warming rack for T2
THÜROS Water pan for indirect barbecuing for THÜROS T1, THÜROS minicater and THÜROS T2
The THÜROS Water pan (WS3035E) supports indirect barbecuing with the THÜROS T1, THÜROS minicater and all THÜROS T2 models.
It is filled with water and placed on the side or middle of the charcoal tray before adding the charcoal or briquettes.
Indirect barbecuing benefits the grillables as it is not cooked directly over the embers. Because of the use of a hood, the food is cooked gentle from all sides simultaneously. This grilling method ensures juicier meat or food in general in comparison to barbecuing it direct.
Product data:
- made of high-quality stainless steel
- dimensions (width x depth): 28 cm x 14 cm
Needed accessories: THÜROS BBQ Hood (BBQH30/ BBQH35)
Recommended accessories: /
Not compatible with: /
Scope of supply:
Water pan for cooking areas 30 x 30 cm and 35 x 35 cm
THÜROS Shish kebab skewer attachment for THÜROS T1
To prepare and grill tasty meat and/ or vegetable shish kebab is as easy as pie with this functional as well as nice-looking skewer attachment.
The attachment includes a frame and x6 skewers made of high-quality stainless steel.
To turn the skewers effortlessly, place them in the cutouts of the frame. The 360° thread of the spits are placed on the side with the smaller cutouts. Like this, the skewers can be turned continuously by pushing it forward gently. Thus, there is no need to lift the skewers for turning.
Product data:
- made of high-quality stainless steel
- x6 skewers each 50 cm long
- dimensions including skewers (height x width x depth): 8 cm x 50,5 cm x 32,2 cm
Needed accessories: /
Recommended accessories: further skewers (S3060E), x6 per package, each 50 cm long
Not compatible with:
When using of the skewer attachment, other grill accessories, i.e. wind deflector, cannot be added.
Scope of supply:
skewer attachment including x6 skewers
Mountable wind deflector for T1 and minicater
Even high wind cannot hinder the joy of a barbecue when using the mountable wind deflector.
It is a multifunctional accessory to adjust the height of the cooking grate as well as to extend with the following:
- diverse spits for rotisserie
- grill motor
- warming rack
Product data:
Needed accessories: /
Recommended accessories:
Not compatible with:
Scope of supply:
Mountable wind deflector
THÜROS Water Pan - for indirect barbecuing, for THÜROS T3 and THÜROS T4
The THÜROS Water pan (WS4260E) supports indirect barbecuing with the THÜROS T3 models, THÜROS T3 BBQ Station, THÜROS T4 models and THÜROS T4 BBQ Station.
It is filled with water and placed on the side or middle of the charcoal tray before adding the charcoal or briquettes.
Indirect barbecuing benefits the grillables as it is not cooked directly over the embers. Because of the use of a hood, the food is cooked gentle from all sides simultaneously. This grilling method ensures juicier meat or food in general in comparison to barbecuing it direct.
Product data:
- made of high-quality stainless steel
- dimensions (width x depth): 30 cm x 17 cm
Needed accessories: THÜROS BBQ Hood (BBQH42/ BBQH4060) or THÜROS Swivelling Hood (SH4242ER/ SH4060ER)
Recommended accessories:
Not compatible with: /
Scope of supply:
Water pan for cooking areas 42 x 42 cm and 40 x 60 cm
THÜROS Warming Rack for THÜROS T3 and THÜROS Baikal
The THÜROS Warming rack extends the cooking area to a second level. It is easily attached to the mountable wind deflector (A4242E) with one simple hand movement. On the second level, cooked grillables can be kept warm or sauces and buns can be heated up.
This enables you to grill goods with different cooking times direct and serve them at the same time. Like this the two levels are used perferctly.
Besides, the mountable wind deflector is the basic attachment for other accessories as well.
Due to the cut outs on the sides, it can be extended for rotisserie. In addtion, the chracoal burner for side heat (KSCH4242) can be attached to the wind deflector instead of the warming rack to have the complete set for indirect rotisserie.
Product data:
- made of electropolished, food-safe, antimagnetic stainless steel V2A
- dimensions (height x width x depth): 10 x 44 x 22 cm
Needed accessories: THÜROS mountable wind deflector for T3 (A4242E)
Recommended accessories: /
Not compatible with: /
Scope of supply:
Warming rack for T3
Mountable wind deflector for all THÜROS T2 models and THÜROS Tripod
Even high wind cannot hinder the joy of a barbecue when using the mountable wind deflector.
It is a multifunctional accessory to adjust the height of the cooking grate as well as to extend with the following:
- diverse spits for rotisserie
- grill motor
- warming rack
- charcoal side burner
The assembly of the wind deflector is quick and easy. It is put on the top of the grill effortlessly with just one swift movement of the hand.
Product data:
- flue barbecue made of stainless steel V2A
- dimensions (height x width x depth): 17,5 cm x 38 cm x 28,3 cm
Needed accessories: /
Recommended accessories:
- THÜROS warming rack (WHR3535E) as a second level to keep cooked grillables warm or heat up, e.g. sauces or buns
Not compatible with:
- THÜROS shish kebab skewer attachment (SPA3535E)
Scope of supply:
Mountable wind deflector
THÜROS Shish kebab skewer attachment for THÜROS T2 models
To prepare and grill tasty meat and/ or vegetable shish kebab is as easy as pie with this functional as well as nice-looking skewer attachment.
The attachment includes a frame and x8 skewers made of high-quality stainless steel.
To turn the skewers effortlessly, place them in the cutouts of the frame. The 360° thread of the spits are placed on the side with the smaller cutouts. Like this, the skewers can be turned continuously by pushing it forward gently. Thus, there is no need to lift the skewers for turning.
Product data:
- made of high-quality stainless steel
- x8 skewers each 60 cm long
- dimensions including skewers (height x width x depth): 7,5 cm x 37,5 cm x 60 cm
Needed accessories: /
Recommended accessories:
- further skewers (S600E), x10 per package, each 60 cm long
- Due to the use of the skewer attachment other grill accessories, i.e. wind deflector, cannot be added.
Scope of supply:
skewer attachment including x8 skewers
THÜROS Warming Rack for T4
The THÜROS Warming rack extends the cooking area to a second level. It is easily attached to the mountable wind deflector (A4060E) with one simple hand movement. On the second level, cooked grillables can be kept warm or sauces and buns can be heated up.
This enables you to grill goods with different cooking times direct and serve them at the same time. Like this the two levels are used perferctly.
Besides, the mountable wind deflector is the basic attachment for other accessories as well.
Due to the cut outs on the sides, it can be extended for rotisserie. In addtion, the chracoal burner for side heat (KSCH4060) can be attached to the wind deflector instead of the warming rack to have the complete set for indirect rotisserie.
Product data:
- made of electropolished, food-safe, antimagnetic stainless steel V2A
- dimensions (height x width x depth): 10 x 61 x 22 cm
Needed accessories: THÜROS mountable wind deflector for T4 (A4060E)
Recommended accessories: /
Not compatible with: /
Scope of supply:
Warming rack for T4
Mountable wind deflector for THÜROS Baikal
Even high wind cannot hinder the joy of a barbecue when using the mountable wind deflector.
It is a multifunctional accessory to adjust the height of the cooking grate as well as to extend with the following:
- diverse spits for rotisserie
- grill motor
- warming rack
Product data:
- made of stainless steel V2A
- dimensions (heigth x width x depth): 21 cm x 57 cm x 30 cm
Needed accessories: /
Recommended accessories: /
Not compatible with: /
Scope of supply:
Mountable wind deflector
Mountable Wind Deflector for all THÜROS T3 Models
Even high wind cannot hinder the joy of a barbecue when using the mountable wind deflector.
It is a multifunctional accessory to adjust the height of the cooking grate as well as to extend with the following:
- diverse spits for rotisserie
- grill motor
- warming rack
- charcoal side burner
The assembly of the wind deflector is quick and easy. It is put on the top of the grill effortlessly with just one swift movement of the hand.
Product data:
- flue barbecue made of stainless steel V2A
- dimensions (height x width x depth): 23 cm x 46 cm x 33 cm
Needed accessories: /
Recommended accessories:
- THÜROS warming rack (WHR4242E) as a second level to keep cooked grillables warm or heat up, e.g. sauces or buns
Not compatible with:
- THÜROS shish kebab skewer attachment (SPA4242E)
Scope of supply:
Mountable wind deflector
THÜROS Shish Kebab Skewer Attachment for THÜROS T3
To prepare and grill tasty meat and/ or vegetable shish kebab is as easy as pie with this functional as well as nice-looking skewer attachment.
The attachment includes a frame and x10 skewers made of high-quality stainless steel.
To turn the skewers effortlessly, place them in the cutouts of the frame. The 360° thread of the spits are placed on the side with the smaller cutouts. Like this, the skewers can be turned continuously by pushing it forward gently. Thus, there is no need to lift the skewers for turning.
Product data:
- made of high-quality stainless steel
- x10 skewers each 60 cm long
- dimensions including skewers (height x width x depth): 7,6 cm x 45,2 cm x 60 cm
Needed accessories: /
Recommended accessories: further skewers (S600E), x10 per package, each 60 cm long
Not compatible with:
Due to the use of the skewer attachment other grill accessories, i.e. wind deflector, cannot be added.
Scope of supply:
skewer attachment including x10 skewers
THÜROS skewer attachment for THÜROS PRO
THÜROS BBQ Hood for THÜROS T1 – cooking area 30 x 30 cm
The THÜROS Barbecue hood including thermometer is a multifunctional attachment for the T1.
Due to its shape, it saves the heat perfectly and functions as a small oven in which even pizza and other baked goods turn out well.
In combination with the water pan (WS3035E) the T1 is fully equipped for indirect barbecuing. Even smoking is no problem.
It also provides an added value when keeping it on the grill as a lid to prevent dirt inside when the BBQ is not used.
Product data:
- made of stainless steel V2A
- thermometer up to 260°C
- dimensions (height x width x depth): 28 cm x 33 cm x 32 cm
Needed accessories: /
Recommended accessories:
- water pan for THÜROS T1 and all THÜROS T2 models (WS3035E)
Not compatible with:
- THÜROS shish kebab skewer attachment (SPA3030E)
- THÜROS mountable wind deflector (A3030E)
Scope of supply:
BBQ Hood including thermometer
Mountable Wind Deflector for all THÜROS T4 models
Even high wind cannot hinder the joy of a barbecue when using the mountable wind deflector.
It is a multifunctional accessory to adjust the height of the cooking grate as well as to extend with the following:
- diverse spits for rotisserie
- grill motor
- warming rack
- charcoal side burner
The assembly of the wind deflector is quick and easy. It is put on the top of the grill effortlessly with just one swift movement of the hand.
Product data:
- flue barbecue made of stainless steel V2A
- dimensions (height x width x depth): 28 cm x 63 cm x 31 cm
Needed accessories: /
Recommended accessories:
- THÜROS warming rack (WHR4060E) as a second level to keep cooked grillables warm or heat up, e.g. sauces or buns
Not compatible with:
- THÜROS shish kebab skewer attachment (SPA4060E)
Scope of supply:
Mountable wind deflector
THÜROS Shish kebab skewer attachment for THÜROS T4
To prepare and grill tasty meat and/ or vegetable shish kebab is as easy as pie with this functional as well as nice-looking skewer attachment.
The attachment includes a frame and x8 skewers made of high-quality stainless steel.
To turn the skewers effortlessly, place them in the cutouts of the frame. The 360° thread of the spits are placed on the side with the smaller cutouts. Like this, the skewers can be turned continuously by pushing it forward gently. Thus, there is no need to lift the skewers for turning.
Product data:
- made of high-quality stainless steel
- x14 skewers each 60 cm
- dimensions including skewers (height x width x depth): 6,6 cm x 42 cm x 61,5 cm
Needed accessories: /
Recommended accessories: further skewers (S600E), x10 per package, each 60 cm long
Not compatible with:
Due to the use of the skewer attachment other grill accessories, i.e. wind deflector, cannot be added.
Scope of supply:
skewer attachmen including x14 skewers
Pizza Stone with Holder for THÜROS T4
Prepare the perfect pizza with the Thüros pizza stone including the suitable holder. It can be used with the Thüros barbecue hood or the Thüros pizza hood.
Scope of supply:
Pizza stone and holder
THÜROS BBQ Hood for THÜROS T2 and THÜROS T2 Tabletop Grill – cooking area 35 x 35 cm
The THÜROS Barbecue hood including thermometer is a multifunctional attachment for the T2. Due to its shape, it saves the heat perfectly and functions as a small oven in which even pizza and other baked goods turn out well.
In combination with the water pan (WS3035E) the T2 is fully equipped for indirect barbecuing. Even smoking is no problem.
It also provides an added value when keeping it on the grill as a lid to prevent dirt inside the when the BBQ is not used.
Product data:
- made of stainless steel V2A
- thermometer up to 260°C
- dimensions (height x width x depth): 33 cm x 39 cm x 38 cm
Needed accessories: /
Recommended accessories:
- water pan for THÜROS T1 and all THÜROS T2 models (WS3035E)
Not compatible with:
- THÜROS shish kebab skewer attachment (SPA3535E)
- THÜROS mountable wind deflector (A3535E)
Scope of supply:
BBQ Hood including thermometer
